We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Inspection Equipment.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Inspection Equipment×日精 - List of Manufacturers, Suppliers, Companies and Products

Inspection Equipment Product List

1～12 item / All 12 items

Displayed results
Appearance inspection equipment for power device chips

Appearance inspection equipment for power device chips

Automating defect inspection with high precision! Achieving no visual inspection through the automation of inspection on all six sides!

This is an appearance inspection device that automates defect inspection of power device chips with high precision. By automating the inspection of all six surfaces, it achieves 2D high-precision defect inspection without visual inspection (target products: chips for IGBTs, power diodes, etc.). In side inspections, focus shifts caused by XYθ misalignment are corrected for each workpiece, ensuring that fine defects are reliably detected with just the right focus. For top and bottom inspections, multi-angle lighting combined with multiple imaging captures inspection images suitable for various defect modes, ensuring that targeted defects are reliably detected. 【Features】 ■ High resolution: High-resolution inspection with a maximum 25Mpix camera ■ Suitable lighting environment: Multi-angle lighting ■ High-speed control and capture: Continuous capture of multiple optimal images for each defect mode *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceramic substrate 2D/3D automatic visual inspection equipment

Ceramic substrate 2D/3D automatic visual inspection equipment

Achieving high-precision and high-speed automatic appearance inspection of ceramic substrates! Capable of incorporating high-precision 3D defect inspection!

This is an automatic visual inspection device for ceramic substrates that can perform inspections with high precision and speed. With multi-angle LED lighting and multiple image captures, it enables high-precision 2D defect inspection. By creating an ideal lighting environment, achieving high-speed image capture, and accommodating multiple image captures and high-resolution inspections, it reliably detects various defect modes. It is also capable of high-precision 3D defect inspection, acquiring height data for the entire inspection surface to detect slight bulges or dents. 【Features】 ■ High-precision 2D defect inspection - Capable of multi-angle/multi-channel control from the construction of an ideal lighting environment - High-speed image capture and multiple image captures allow for lighting changes and multiple image captures - Supports high-resolution inspections with a choice of 4M to 25Mpix cameras ■ Capable of high-precision 3D defect inspection - Acquires height data for the entire inspection surface to detect slight bulges or dents *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceramic Device Green Sheet Appearance Inspection Equipment

Ceramic Device Green Sheet Appearance Inspection Equipment

Achieving fine defect detection and precise dimensional inspection with high-resolution 2D inspection! For low-temperature co-fired ceramics.

This is a device for inspecting defects such as stains and foreign substances present on green sheets for LTCC (Low-Temperature Co-Fired Ceramics), as well as irregularities, thickening, thinning, and foreign substances in the printed electrode patterns. It is capable of inspecting the positional accuracy of the electrode patterns and can be used for quality control before the green sheet stacking. 【Features】 ■ Achieves fine defect detection and precise dimensional inspection with high-resolution 2D inspection ■ Achieves inspection of fine irregularities with high-resolution 3D inspection ■ Provides an optimal lighting environment using multi-angle illumination ■ Realizes high-speed inspection with fast lighting switching and high-speed image capture *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2D/3D Appearance Inspection Device for Individual Ceramic Substrates

2D/3D Appearance Inspection Device for Individual Ceramic Substrates

Detecting "bulges" and "dents" defects through high-density 3D inspection! Sorting into good products and defective products.

This is a device for performing visual inspections of power device ceramic substrates for defects such as burrs, chips, cracks, scratches, dirt, discoloration, solder overflow, foreign objects, and bulging/denting on both the front and back surfaces. By setting magazines or trays containing the ceramic substrates and operating the device, visual inspections of the front and back surfaces of the ceramic substrates are conducted, and based on the inspection results, sorting into good and defective products is performed. 【Features】 ■ Detection of "bulging" and "denting" defects through high-density 3D inspection ■ Realization of an optimal lighting environment using multi-angle lighting ■ High-speed inspection achieved with fast lighting switching and rapid image capture ■ Capable of inspecting both the front and back surfaces *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.jpg
  • image_03.jpg
  • Visual Inspection Equipment
  • Other inspection equipment and devices
  • Automatic sorting machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bag Sealing Inspection Device *Demo Available

Bag Sealing Inspection Device *Demo Available

Inspection device for verifying the sealing of bags using air cylinder pressurization, designed for the food and pharmaceutical industries!

The "bag sealing inspection device" is a machine that transports workpieces on a conveyor belt, applies pressure with an air cylinder, and checks whether the bag is sealed. The height of the workpiece under pressure is measured by a sensor, and if it falls below the set standard value, it is deemed a defective product. This also contributes to the automation of the production line. * We also accept demo evaluations to determine if removal is possible with samples provided. * For more details, please contact us or download the PDF to view.

  • Printed Circuit Board
  • lens
  • LCD display

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lead frame appearance inspection device

Lead frame appearance inspection device

Achieving automatic visual inspection of lead frames and die bond chips! Compatible with high-resolution inspection!

This is an automatic visual inspection device for lead frames capable of high-precision 2D defect inspection. In addition to lead frames, it can also inspect defects on die-bond chips on the lead frames. You can choose from high-resolution inspection-compatible cameras ranging from 4M to 25M pixels, and it enables high-precision 2D defect inspection with multi-angle LED lighting and multiple image captures. It reliably detects various defect modes. 【Features】 ■ Supports inline inspection ■ Maintains a clean environment inside the device with downflow from a clean fan ■ Outputs inspection results using MAP data *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2D/3D Visual Inspection Equipment for Automotive Semiconductor ICs

2D/3D Visual Inspection Equipment for Automotive Semiconductor ICs

Elimination of visual inspection for automotive semiconductor ICs! High-precision defect inspection with 3D/2D dimensional inspection.

This is a high-performance appearance inspection device for automotive semiconductor ICs that enables all-direction inspection of devices. With 3D/2D dimensional inspection, it allows for high-precision defect detection on both sides of leads, balls, and mold surfaces. It can perform high-speed imaging of up to 20 frames with a 25M camera and 7-channel individual volume control, and by using multi-angle lighting and multiple images, it can eliminate dents and extract foreign objects, reliably capturing targeted defects such as root metal foreign objects, foreign objects on leads, and voids on mold sides. Additionally, it removes detected foreign objects using dry ice, restoring defective products to good condition. 【Features】 ■ 3D/2D dimensional inspection ■ Accurate 3D measurement using phase shift method ■ Reliable capture of targeted defects with multi-angle lighting and multiple images ■ Removal of detected foreign objects using dry ice, restoring defective products to good condition ■ Realization of all-direction inspection of devices by adding a side inspection stage *For more details, please refer to the PDF materials or feel free to contact us.

  • Visual Inspection Equipment
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-Precision 6-Surface 2D Appearance Inspection Device for Image Sensors

High-Precision 6-Surface 2D Appearance Inspection Device for Image Sensors

Achieving no visual inspection through inspection automation! Fine defect inspection of all six surfaces of the image sensor!

High-precision 2D appearance inspection device with a high-precision defect inspection unit for six surfaces. It can perform fine defect inspections on all six surfaces of various image sensors, including insert-type for surveillance cameras and SMT type for DSC. With original seamless, seven-channel, multi-angle lighting, it provides an optimal lighting environment, allowing for batch capture of multiple images in inspection mode with a minimum of 10 msec/image processing. Inspections are conducted with high resolution and high definition using cameras up to 25 Mpix. 【Features】 ■ Top and bottom inspection - Focuses on the inspection surface by combining multi-angle lighting, multiple image captures, and Z-axis linked control to acquire inspection images. ■ Side inspection - Corrects focus shifts caused by XYθ misalignment for each workpiece, ensuring precise detection of fine defects. *For more details, please refer to the PDF document or feel free to contact us.

  • Visual Inspection Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IC package automatic appearance inspection device 'LI700E'

IC package automatic appearance inspection device 'LI700E'

Achieve automation of IC packaging with space-saving design! Inspection equipment capable of high-precision 2D and 3D dimensional measurement.

The "LI700E" is an appearance inspection device that conducts dimensional inspections such as terminal bending of IC packages, as well as defect inspections for scratches and foreign objects. It achieves automation of inspections in a compact space. Inspections are performed from the bottom of the product, checking the mold surface and terminal surface, followed by pass/fail judgment and sorting. 【Features】 ■ High-precision 2D & 3D dimensional measurement ■ Defect inspection ■ Compact and space-saving ■ Automatic health check function ■ Support for traceability data management *For more details, please refer to the PDF document or feel free to contact us.

  • LI700E　検査部.png
  • パッケージ画像.png
  • 検査例.png
  • 装置図?.png
  • 装置図?.png
  • 装置図?.png
  • Microcomputer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CI Series Bare Chip Appearance Inspection Device for Power Modules

CI Series Bare Chip Appearance Inspection Device for Power Modules

By conducting a complete visual inspection of the chips before implementation, we can reduce losses in subsequent processes and improve yield! Ideal for acceptance inspection and screening in module assembly!

The "CI Series" is a device that conducts visual quality inspections of individual bare chips stored in a chip tray, classifying them as good or defective. Detection examples include edge cracks, chipping, scratches, foreign matter adhesion, discoloration, etc. Using the standard multi-angle lighting, it is possible to set lighting conditions that capture various defect modes that appear on the product. This device is suitable for pre-shipment inspections by semiconductor bare chip manufacturers and contract manufacturers. Examples of target products include power devices, ICs, image sensors, and wafer chips for various sensors. <CI8000> - Six-sided inspection model (inspection of all six sides: front, back, and sides) - Fastest processing capability of 8000 CPH - Equipped with a stage that enables high-resolution inspections <CI200i> - Front and back inspection model - Space-saving by conducting surface inspection in the tray - Minimizes contact with the product, ensuring no damage - Equipped with a high-resolution inspection stage *For more details, please refer to the PDF document or feel free to contact us.

  • Semiconductor inspection/test equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
X-ray Automatic Inspection System XS Series, manufactured by Nordson

X-ray Automatic Inspection System XS Series, manufactured by Nordson

A high-resolution (<1μm) X-ray automatic inspection system designed for micro samples, such as wire bonding and micro bump bonding.

The XS series is a compact, high-resolution automatic X-ray inspection system designed for high-performance and high-speed inspection of semiconductor samples, wire bonding, single/multi-panel PCB assemblies, and samples on trays. It is capable of inspecting applications ranging from component-level inspections to medium-sized SMT boards.

  • X-ray inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nano Focus X-ray Inspection System Quadra7Pro Nordson

Nano Focus X-ray Inspection System Quadra7Pro Nordson

The latest X-ray inspection device equipped with next-generation dual-mode tubes.

The Quadra7 Pro has further improved the conventional maintenance-free shielded transmissive type X-ray tube and is equipped with the industry's first dual mode. It can accommodate a wider range of applications, from power devices to wafer inspection, and by combining it with our latest generation Onyx flat panel developed in-house, it has further reduced noise and enhanced performance.

  • X-ray inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Inspection Equipment

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.